Banner

Banner
Ramast
Linux Developer

Monday, November 10, 2025

خطوات زواج مصري من اجنبية خارج مصر و كيفية توثيق الزواج في مصر

 مقدمة

البوست ده بيشرح الخطوات القانونية لزواج مصري من اجنبية خارج مصر. تجربتي هي مع الزواج من الجنسية الاندونيسية بس الخطوات مش هتختلف كتير مع الجنسيات التانية:

الاوراق المطلوبة منك كمصري:

  • شهادة ميلاد
  • سجل فردي لو متجوزتش قبل كدة او سجل عائلي لو سبق ليك الجواز 
  • لو مسيحي محتاج شهادة خلو موانع من الكنيسة

 بخصوص شهادة خلو الموانع: السفارة كل اللي يهمها ان يكون في ختم كنيسة على الورقة ايه المكتوب بالظبط في الورقة مش مهم اوي طالما العنوان هو: "شهادة خلو موانع" غير كدة متشغلش باللك

 

بالنسبة لشهادة الميلاد هتحتاج تختمها الاول من السجل المدني و بعدين هتحتاج تختمها من الخارجية.
بالنسبة للقيد الفردي او العائلي طلعه احسن من السجل المدني الاساسي في العباسية عشان زحمة اقل و برضو هتختمه من الخارجية.

خطوات الزواج:

  • هتاخد الاوراق دي و تروح بيها لسفارة مصر في الدولة اللي عايز تتجوز فيها عشان السفارة تديلك ورقة اسمها شهادة خلو موانع.
  • بعدين هتترجم شهادة ميلادك و القيد الفردي او العائلي للغة البلد و لازم طبعا تكون ترجمة معتمدة
  • بالنسبة لاندونيسيا هي بتشترط زواج ديني فهتقدم الاوراق دي للمؤسسة الدينية اللي هتجوزكم جواز ديني و هتاخد منها في الاخر شهادة الجواز
  • هتوثق شهادة الجواز في وزارة العدل - بتاعت الدولة الاجنبية - و بكدة انت تعتبر خلاص اتجوزت في الدولة الاجنبية
 

خطوات توثيق الجواز في مصر:

 
  • هتاخد شهادة الجواز الاجنبية بعد ما ختمتها من وزارة العدل و هتختمها كمان من وزارة الخارجية - بتاعت الدولة الاجنبية - و بعدين تطلع على السفارة المصرية عشان تصدق عليها.
  •  لما تنزل مصر هتروح تختم وثيقة الجواز تاني من وزارة الخارجية المصرية.
  •  روح دار القضاء العالي و اسال على قسم الترجمة و ترجم هناك الوثيقة للغة العربية.
  • هتاخد الترجمة المعتمدة من دار القضاء + الاصل و تروح وزارة العدل قسم زواج الاجانب عشان توثقة.
     
محلوطة هامة: لازم الزوج او الزوجة الاجنبية تحضر معاك عند توثيق الورق في وزارة العدل.
 

التسجيل في السجل المدني:

  • حضر شهادة ميلاد حديثة للطرف المصري و صورتين بطاقة
  • بالنسبة للطرف الاجنبي ممكن اصل شهادة الميلاد موثقة من السفارة و الخارجية مع ترجمتها او يقوم الطرف المصري بعمل اقرار في الشهر العقاري يقر فيه بان اسم والدتة زوجته (او والدة زوجها) هو فلانة الفلانية.
  • هتروح بعد كدة السجل المدني في العباسية و تروح قسم الترجمة لترجمة جواز سفر الطرف الاجنبي
  • بعد كدة هتروح مكتب اسمه "سجل الخارج" في نفس المكان و خد معاك الاوراق اللي طلعتها مع وثيقة الجواز الاجنبية و الترجمة و تقوم بتسجيل الجواز. خلي باللك انهم هياخدوا كل الاوراق بما فيها اصل وثيقة الجواز الاجنبية
  • بعد يومين هتقدر تطلع وثيقة الجواز المصرية من اي سجل مدني

Monday, May 20, 2019

How to obtain indonesian visa from Egypt

I am Egyptian who went to their embassy approximately 7 times to get Indonesian visa. This guide is meant to help you cut that time to just two visits.

Do I need visa at all?


Probably not.

If you intend to spend less than 30 days you can just fly to Indonesia and get in without any visa. Just make sure you bring with you return (or on-ward) flight ticket and hotel reservation.

If you want to stay these for more than 30 days, you can still obtain visa on arrival that gives you 30 days but can be extended in indonesia for another 30 days (total of 60 days).

If you are to apply for a visa in the embassy however, you get 60 days directly. Not 100% sure if you can extend it beyond that.

Where do I apply for the visa?


I will tell you where NOT to apply. In Indonesia's official consulate near Tahrir square. There is another smaller consulate in Nasr City that issue visas.

 

The flag is where a famous nearby school "Al Manhal Private School" is located. There is a swvl bus stop there.

What papers do I need to bring with me?



1. Your passport
2. HR letter (IN ENGLISH)
3. Return or onward flight ticket
4. Bank Statement that with at least 1000 dollar balance.
5. Hotel booking
6. 50 US Dollars (Egyptian pound won't be accepted)
7. If you are not Egyptian, you might need more papers. I don't know.

How do I avoid going many times?


1. Make sure you don't go in a day that is public holiday for Indonesia or Egypt
2. Go early (embassy opens at 10:30)

Once there get application form and fill it. If all your papers are accepted then you will have to go to a CIB bank and pay there then bring payment receipt back to the embassy.

There is a CIB branch on the same street of the embassy but it's a bit long walking distance. Can take any bus going west and ask to drop you at CIB bank.

Once you have made the payment, you back to the embassy, provide all the papers and the payment receipt and leave your passport. You should be able to pick your passport within 3-4 days. For passport pickup you should come late (1:30 to 3pm).

I applied for my visa during Ramadan. During normal months the time might change slightly so better ask there when to pickup your passport



Enjoy Indonesia.








Thursday, January 31, 2019

How to unbrick your kindle paperwhite? (For Linux Users)

The process of unbricking itself, is covered here and I will assume you have already read that link before you continue reading this article.

There you had two options, either flashing system image yourself or downloading an amazon official update and installing that instead.

But sometimes that's not good enough. What if you have already made changed to the system that you want to maintain? What if you already know what is the problem and just need to access the system and correct the mistake?

For that there is a Recovery mode where you can have shell prompt and can modify the existing system as u wish.

You get there by booting into diagnostics mode, then from the options to login to recovery mode however you must provide username/password.

username is always root but finding the password can be a bit tricky since it's NOT same as your main system's password.
For me password was "mario" but if that didn't work for you then you will need to find your device serial number and generate password using this guide or this.

Once you are logged in, your system partition is the first partition /dev/mmcblk0p1 you can mount it and modify it as you please. Your data partition would be already mounted for you in /mnt/us

After you finish make sure you disable diags mode so that when you reboot you are rebooted to main system.

How NOT to install custom fonts on your kindle paperwhite.

This article is meant for people who have rooted Kindle and have good understanding of Linux command line. I explain here how I tried to manually - without use of any scripts - install custom fonts to my kindle, How I bricked it twice because of this and how I got it working at last.

If you are just looking for installing custom fonts, please refer to this post instead.

Attempt 1


I've tried to locate the directory where kindle store it's fonts and tried to add my custom font there.

The main and most important font directory is located in /usr/java/lib/fonts/ however that directory is mounted readonly and can NOT be mounted in read-write mode - for reasons I will explain later -.

There was however other directories that contained fonts and even though I could add my font there, I later realized that it's very difficult to make amazon use my custom font. It's there, it's installed but you can't select it when reading a book.

Attempt 2

My only option was to replace one of the fonts the reader allow u choose from (Baskerville, Caecilia, Futura, Helvetica and Palatino). The two in red are used by the system (especially Futura) so I chose another one.
Only problem is that they are located in the read only directory  /usr/java/lib/fonts/.

Why is it read only?
The directory is just a mount point, the fonts are actually stored in a disk image   /usr/java/lib/fonts/fonts.cramfs.img That disk image uses readonly file system called cramfs. It's a read only filesystem, once it's been created it can never be modified again

The good news however is that the tools needed to create such filesystem are already bundled in your kindle so the idea is to copy over the fonts to a directory of your choice, modify it as you desire, use the tools bundled with kindle to convert it back to cramfs and replace the original one with your version.

mkdir /mnt/base-us/fonts
cd /mnt/base-us/fonts
cp /usr/java/lib/fonts/* .

# <<Modify fonts as desired at this point>>
# Regenerate fonts special files to accommodate your changes.

mkfontscale
mkfontdir
# Generate new cramfs filesystem
cd ..
mkcramfs fonts/ fonts.cramfs.img
# Backup original file
cp /usr/java/lib/fonts.cramfs.img fonts.cramfs.img.backup
# Replace original file with your file
mntroot rw
cp fonts.cramfs.img /usr/java/lib/

After you run this code you will get an error about not enough disk space and as soon as you reboot, you will find that your device is BRICKED.
I repeat, following the code above will almost certainly BRICK your device, don't try it until you read rest of the article.

Why this bricked my device?
When you try to replace one file with another, what actually happen is that the original file is deleted first then the second file is copied in the same place.

But what if the original file is in use by another program? In Windows you would get an error and the operation will fail but in Linux (and Unix), It will mark the original file as deleted - while still preserving it on disk - and put your file in place. When the program(s) using the original file are closed then the system can truly delete the original file and free the disk space it's occupying.

In this case original fonts.cramfs.img file was obviously being used by the system so deleting it didn't release the space it's occupying. Unfortunately for me, the remaining disk space was much smaller than my custom fonts.cramfs.img so when I tried to replaced the original I got disk space error and ended up with partial fonts.cramfs.img file. When I restarted kindle, it tried to mount my custom file and it failed so the system didn't load at all. [ bricked ]

Attempt 3


I will not go in details here on how I unbricked my kindle, I will put that in a separate article but for the most part I followed this amazing guide

My next idea was to write a script that restart kindle UI and before it get chance to start again I unmount the original fonts disk image and mount mine instead. That way the original would not be in use and when I delete it, the system should free it's disk space.

This was my code

pkill blanket
while ! umount /usr/java/lib/fonts
do 
  true # Do nothing
done
mount -oloop /mnt/us/fonts.cramfs.img /usr/java/lib/fonts/

Even though I succeeded in unmounting the original fonts image file, for some reasons system still didn't free the space it's occupying when I deleted it.
I ended up bricking my device once more.

Attempt 4


By that time I became an expert at unbricking my kindle and wasn't afraid to play around so I went back to my custom fonts, I deleted many chinese and korean fonts, regenerated my custom image using the code mentioned above and replaced original while in recovery mode and now I have extra free disk space and also my custom font. Yaay

My final advice

Modifying fonts file will always pose risk of bricking your device so don't do it if you can't deal with bricked kindle.
If you are willing to take that risk however, I advice you to make sure there is more disk space in your root directory than the size of your custom fonts image BEFORE replacing the original.

If you found yourself in situation where the original has been deleted but you don't have enough disk space to copy your own, create a custom font image that ONLY contain the fonts Futura, Helvetica then copy that image instead of corrupted one. This solution has not been tested however so it may or may not work but it's certainly better than rebooting with a corrupted fonts image.

Happy Hacking

Thursday, November 8, 2018

How I compiled FreeCAD in Gentoo (2018 Guide) [ updated 2020 ]

Compiling FreeCAD on gentoo


Introduction:

While you could download FreeCad binary that would work out of the box with 0 hassle, it was slow and not very stable (lot of segmentation errors on my gentoo machine.

There used to be gentoo ebuild for freecad but I couldn't find it during the time of writing this.

I've documented the steps I followed to compile FreeCAD and I am posting it here in case someone finds it useful.

Please note that while compiling from source reduced crashes and increased speed a lot, it didn't help with importing SVG problem (still gives segmentation error).

Download FreeCAD source code

Emerge required packages


echo "sci-libs/vtk X imaging qt5 boost tbb rendering" > /etc/portage/package.use/vtk
echo "dev-libs/xerces-c iconv icu" > "/etc/portage/package.use/xerces-c"

emerge xerces-c

emerge libmed

# Ensure it's version 3 with -static-libs (disable static-libs)
media-libs/coin

# Adding qt repo overlay using layman
emerge app-portage/layman
layman -a qt
layman -E qt



# If u started getting errors related to boost while compiling FreeCAD, consider re-emerge boost
emerge -1 boost


# If getting error
No rule to make target '/usr/lib64/libmedC.so', consider re-emerge libmed


Installing Opencascade

You can either emerge opencascade

emerge libopencascade (+tbb +vtk)

or build it yourself.
At time of writing the available version in portage is 6.9.1-r2 which caused some crashes in FreeCAD
If you couldn't find newer build, It's better that you compile it and install it yourself.

wget 'https://www.opencascade.com/system/files/occt/OCC_7.3.0_release/opencascade-7.3.0.tgz'
(extract and cd into the package)
cmake -DUSE_VTK=1 -DCMAKE_BUILD_TYPE=Release .
make
make install


Finally compile FreeCAD

cmake -DFREECAD_USE_EXTERNAL_PIVY=ON -DCMAKE_BUILD_TYPE=Release  -DBUILD_QT5=ON -DPYTHON_EXECUTABLE=/usr/bin/python3 $PWD
cmake --build .



Run it directly first to ensure it's working by executing:
./bin/FreeCAD

You can then install it after
make install

Optional, install openscad for extra FreeCAD features

emerge openscad

Thursday, October 5, 2017

Booting Linux on a 10 years old laptop using usb stick

I have an old Acer laptop (10 years old) which no longer has a functional hard disk.
So the only way to boot was using a usb stick which my laptop presumably support.
I tried to boot some Linux installed on a usbstick but isolinux bootloader would just report that there was a problem and refuse to boot.
I tried putting linux distro that support grub bootloader but again, grub gave this error: grub - error out of partition

After lot of frustration I found that the problem was that my flash memory was simply too big (7GB) and my 10 years old laptop's BIOS is not ready to deal with such massive size memory stick.


Solution?

I've created a smaller partition table and placed it on my usb stick to make it look like it's only 2GB memory stick. That surprisingly solved the problem and my laptop booted just fine.

Here is how I did it (under Linux/Unix)

First I created a 2GB empty file

fallocate -l 2G disk.img

If that didn't work, try
dd if=/dev/null of=disk.img bs=4k count=512k

Now you have a 2GB empty file, let's associate that with a loop device

losetup loop3 disk.img

So far so good, now let's create new file system on the disk.img file

fdisk /dev/loop3

Command (m for help): n
Partition type
   p   primary (1 primary, 0 extended, 3 free)
   e   extended (container for logical partitions)
Select (default p):  <press enter and keep pressing enter until you return to the prompet>
Command (m for help): w

Final step, write the new partition table to the usb stick

dd if=disk.img of=/dev/<your usb stick dev>
(Note that would result your usb stick appear to have only 2GB capacity but this is not permanent and can be easily reverted back later)

Done, you are now ready to install whatever usb stick linux dsitro (like dsl, sysrescuecd or any other on your laptop)

Monday, April 6, 2015

Adventure in a Balinese cemetery


I was staying with my friend in a nice hotel in Ubud (Bali)
People working in the hotel were very friendly and very eager to talk about their culture and religion.
We discussed Hinduism, the offerings, the festivals, .... and I asked if any festivals would happen soon.
She said there are so many minor festivals and for example there is a one after two days called Magic festival.
Magic? hmm, that's interesting. What kind of magic do you practice?
She said no magic, but there is that evil creature the source of envy and hate - a devil? -
who would appear that day and some special (gifted?) people could see it.
We pray that day not to see that creature. I asked if she ever saw it, she said no and she doesn't want to.

Hmmm, so what do I do if I want to see it? they start to laugh and explain that not everyone can see it.
One of them pop out her smartphone and show me a video of a claimed appearance which to me looked like a guy wearing a mask in dark night.
I repeated the question, Assuming I could see it what should I do to see? She said: you have to go a cemetery.
What time? I asked as if I am asking her for a date. She was dead serious when she said after 12 mid night the night before.
Wanna come with me? No, she said "I scare"
The next day (day before the festival) I meet another local man who has a shop with his wife.
I told him about my intentions and he asked me who told you about that? I thought he would deny the whole thing.
Instead he confirmed it. Even though he has been to that cemetery a lot he wasn't shy to say "he scare" when I asked if he wants to come.
Whatever, now I want to go even more.

Clock ticks 10:30pm I start limping to the cemetery - a motorbike fell on my foot few days earlier.
I wasn't worried the demon would out run me, they always do. I was more concerned about the cemetery guards.
I was being told if I run inside the cemetery they wouldn't dare to follow me inside so it was quiet relieving except that I can't run.

I really wanted someone with me. Partially because I also "scare" but also because if the demon didn't come at least I'd have nice company.
There was a dormitory near my hotel. I thought about it many times before.
I can't just approach group of strangers and ask if they would like to join me to a cemetery at midnight so I didn't dare to ask there.
I continued walking past the dorm until I got close enough then I had to ask for directions.

First guy  (Western) told me there is no cemetery in that area and he didn't seem he want to discuss it further.
Two Singaporean guys I asked after were more curious and asked me why I want to go and they said its a very bad luck in their culture to see a ghost (Its a demon for Christ's sake not a ghost).
Well guys, Wish me horrible luck. (I should've said but, I didn't)
Eventually I got near the entrance. The cemetery didn't even have a door, no guards, no nothing.
Only some fire flies making dots of yellow light that soon vanish leaving the area in complete darkness except for quarterly lit moon

As I approached the entrance I was surprised to see two other guys with clear American accent coming out.
I was excited and asked them if they also heard about the magic festival. They said they had no clue. They came to see the fire flies. They didn't even know it was a cemetery.

I explained to them my intentions, they argued that this can't be a cemetery because Hindu burn their dead.
I explained what the hotel lady told me about dead people having to wait for up to 10 months before they can get a proper cremation.
If the family is poor or doesn't want to wait they burn the dead body in a big oven. some people are not burned at all.

They were spiritual (in some sense). One of them seemed to be the leader/teacher/more experienced while the other was more like enthused follower.
So that leader guy - will call him Bob - agreed to join with his friend and we started to explore the cemetery with flashlight.
In the meanwhile they were talking about the sequence of coincidences that led us to me and how they came for something simple like watching butterflies only to find themselves in the right place at the right time to witness this.

They refused to call it coincidences and that there was that magician who told them things that they can not reveal to me and other things that happened to them earlier that they also can not tell.

I was like: hmfff whatever, still their company is better than staying in a cemetery alone.

Lot of insects, lizards and frogs and tree leaves falling all make sounds which is not very comfortable at this point.
We sit on the floor near the enterance talking and waiting for something to happen.
Bob stated to collect rocks and make a circle to "protect" us.
It started to get creepy when they told me about their true intentions at this point.
They were not looking for fireflies, they practice some religion where they worship co..ehm..x (yes, you heard that right, move on)

Suddenly I started to scare. They are not too strong but they are two!
In a cemetery at 12am there isn't much I can do if they decided to worship mine.
I shook off that idea. People have the right to believe what they want or worship what they want .. you know so long as they do it away from me and my thing.

Bob says they kind of worship that demon as well which he says is not as bad as the media depict it (ooh, bloody media they ruin everyone's reputation)
and yet he wasn't very thrilled to meet it either. How come you don't want to meet with the god you worship? He agreed that in some sense I am right.
[I should work as a demon preacher, I guess]

Time passes and aside from the small movements of lizards and insects and light of fire flies, nothing seem to be happening.
Bob suggest that if I want to see it, probably I should get out of the "protection" circle which I eagerly did with a big smile on my face.
Where do I sit? here? (Its more fun when you have people to tease)

Few more minutes and nothing much has changed. Although to be honest I felt safer inside the circle.
Bob starts to make his prayers and ask us - me and the other guy - to be silent for a while and we complied.
We started talking again after getting bored. Eventually Bob said you know? That demon is in the tombstone downstairs.

There was a very big distinctive tombstone that we saw earlier that stand alone in a lower ground (reachable by two stairs at both sides of the cemetery).
I started to scare again! both from the demon and from the two guys who might have an evil plan for me when I come back or at best a silly prank.

I suggested a bet if I go there and I find nothing but he refused to bet. Alright thats relieving that means he isn't very confident about that demon's presence.
I also refuse going down stairs without compromising my dignity since he refused the bet which is exactly what I did.
More time passes and I am bored as hell now. alright whatever, I will go down there. A prank would be more interesting that that boring silence.
I turn my mobile flash on and move toward the end of the cemetery, look from the top at the big tombstone below. hmmm no demons, good.
I go back and tell him that but he insist that I must go downstairs and see for myself.

I am suspicious but I almost won (proving my point that such thing doesn't exist) and I can not turn back now.
I went downstairs, more worried this time than ever since I arrived. While those Bas...rds sitting happily in their protection circle.

With each step I hear many sounds which I assume are lizards and insects running away from me.

I found a lovely colorful warm on a plant. I stopped to take a picture of it, flash turn on and ...

chik, got a nice shot. nobody downstairs except for the dead king under that big tombstone.  I went back and as I feared they vanished. What were they planning to do all that time? I am about to find out.
I get closer to the entrance and .. oh, there they are. Sitting happily in their stupid circle waiting for me.
I took a deep breath and released it with a sight of relief.

Bob eventually gave up and said maybe better they leave so that I can have alone time with the demon. I told him he is probably not coming tonight.
We went back to our hotels. couple of drunk girls passed by on a scooter waving for us.
I said: Hey take us ... oh no, take me those guys don't care.
I saw a sign of disappointment on Bob's face. Sorry dude.
We separated each to his hotel short after.

The END.
This story has happened for real with no exaggeration or any added details.

Sunday, December 22, 2013

Websites that will educate you for free

I found this list of links posted by a redditor called Fletch71011 
The original post can be found here

Now here is the list:

No Excuse List - Includes sources for everything you can want. I included some more popular ones with brief write-ups below. Credit to /u/lix2333.

Reddit Resources - Reddit's List of the best online education sources

Khan Academy - Educational organization and a website created by Bangladeshi-American educator Salman Khan, a graduate of MIT and Harvard Business School. The website supplies a free online collection of micro lectures stored on YouTube teaching mathematics, history, healthcare and medicine, finance, physics, chemistry, biology, astronomy, economics, cosmology, organic chemistry, American civics, art history, macroeconomics, microeconomics, and computer science.

Ted Talks - Talks that address a wide range of topics ("ideas worth spreading") within the research and practice of science and culture, often through storytelling. Many famous academics have given talks, and they are usually short and easy to digest.

Coursera - Coursera partners with various universities and makes a few of their courses available online free for a large audience. Founded by computer science professors, so again a heavy CS emphasis.

Wolfram Alpha - Online service that answers factual queries directly by computing the answer from structured data, rather than providing a list of documents or web pages that might contain the answer as a search engine might. Unbelievable what this thing can compute; you can ask it near anything and find an answer.

Udacity - Outgrowth of free computer science classes offered in 2011 through Stanford University. Plans to offer more, but concentrated on computer science for now.

MIT OpenCourseWare - Initiative of the Massachusetts Institute of Technology to put all of the educational materials from its undergraduate- and graduate-level courses online, partly free and openly available to anyone, anywhere.

Open Yale Courses - Provides free and open access to a selection of introductory courses taught by distinguished teachers and scholars at Yale University.

Codecademy - Online interactive platform that offers free coding classes in programming languages like Python, JavaScript, and Ruby, as well as markup languages including HTML and CSS. Gives your points and "level ups" like a video game, which is why I enjoyed doing classes here. Not lecture-oriented either; usually just jump right into coding, which works best for those that have trouble paying attention.

Team Treehouse - Alternative to Codecademy which has video tutorials. EDIT: Been brought to my attention that Team Treehouse is not free, but I included it due to many comments. Nick Pettit, teaching team lead at Treehouse, created a 50% off discount code for redditors. Simply use 'REDDIT50'. Karma goes to Mr. Pettit if you enjoyed or used this.

Think Tutorial - Database of simple, easy to follow tutorials covering all aspects of popular computing. Includes lots of easier, basic tasks for your every day questions or new users.

Duolingo - For all of your language learning needs.

Memrise - Online learning tool that uses flashcards augmented with mnemonics—partly gathered through crowdsourcing—and the spacing effect to boost the speed and ease of learning. Several languages available to learn.

Livemocha - Commercial online language learning community boasting 12 million members which provides instructional materials in 38 languages and a platform for speakers to interact with and help each other learn new languages.

edX - Massive open online course platform founded by Massachusetts Institute of Technology and Harvard University to offer online university-level courses in a wide range of disciplines to a worldwide audience at no charge. Many other universities now take part in it, including Cal Berkeley. Differs from most of these by including "due dates" with assignments and grades.

Education portal - Free courses which allow you to pass exams to earn real college credit.

uReddit - Made by Redditors for other Redditors. Tons of different topics, varying from things like science and art to Starcraft strategy.

iTunes U - Podcasts from a variety of places including universities and colleges on various subjects.

Stack Exchange - Group of question and answer websites on topics in many different fields, each website covering a specific topic, where questions, answers, and users are subject to a reputation award process. Stack Overflow is used for programming, probably their most famous topic. Self-moderated with reputation similar to Reddit.

Wikipedia - Collaboratively edited, multilingual, free Internet encyclopedia. Much better source than most people give it credit for, and great for random learning whenever you need it. For those looking for more legit sources for papers and such, it is usually easy to jump to a Wikipedia page and grab some sources at the bottom.

Tuesday, October 29, 2013

How can you tell good from bad?


Mummy, when people die in the war... Where do they go?

Oh, what a question.
-It depends.

-On what?

Whether they fought on the side of the goodies or the baddies.
Your father, for example, fought for England on the side of the goodies.

How do you know who the goodies and the baddies are?

[Sighs] That's enough questions.
Eat your food.

This conversation from the movie "The others" which was between children and their Mother.

Now we all know how difficult it is to answer that question "How to know which side is good and which is bad?". If there is a definite answer for that question there we should be able to end all wars

So why is it so hard to tell good from bad?
I thought it isn't, and so being a very logical person I tried to come up with a set of rules which - ideally - if followed I could always tell which side is good and which is bad

Result: Complete failure!
First reason is obvious: You need to know all the facts including people's inner intentions among other things to judge.
But lets say for the sake of argument that I know everything can I tell which is right and which is wrong?

Turns out that its not possible
To know why let me give a simple example.
Lets say you live somewhere in north Egypt and you want to visit somewhere in south Egypt and so you started to head north.
Is that right direction or wrong direction?
A quick answer would be of course wrong. If you live in the north and want to go somewhere in the south then you should head south not north.

But that is not always true, maybe I am moving north to reach the airport.
Also in theory if I keep moving to the north I will eventually (after going around the earth) reach my destination in the south

On the other hand if I live in the north and want to have a walk with no specific destination in mind, any direction would right and no direction would be wrong

Conclusion: good or bad depends on your own personal goals
If your goal is to reach the southern place fast then you should head north to the airport. (the other solutions are bad/wrong)
If your goal is to reach cheap then go south.
If your goal is to reach after 20 years, then head north.
If you have no goal, right and wrong become irrelevant

Applications in real life
If your goal is to make a lot of money in short time, then robbing houses is "good" while having a full time job is "bad".
BUT If your goal is to make a lot of money in short time while living long enough to enjoy it then robbing houses is bad

That is none sense, Morals are universal and everyone knows good from bad!
True but that's only because humans share same universal goal
This goal is to survive and thrive

Killing is terrible crime everywhere because its against surviving
Stealing is less terrible because it reduces chance of survival for the robbed one rather than eliminate it all together
Helping others is good because it increases the chances of survival for the ones being helped

The rule for global morals
Its easy to make a rule now that we know the universal goal
The good is anything I do that increase chance of survival for others and/or their offspring
The heroic is anything I do that increase chance of survival for others and/or their offspring while greatly DECEASING mine [ ex: saving a drawning person ]
The bad is simply the opposite

Where does the conflict comes from then?
It comes from the question: Who are the "others" ?
For a serial killer, the others are only him
For a gang, the others are the gang members and their families so the rule above only applies to them.
For a normal civilian, the others are people living in their country, other countries don't matter much
........
And so on until you reach a vegan person who consider the others to be every living creature on the planet.

Is it still bad to do bad things if I am sure it will not affect my "survive and thrive" goal?
In principal yes but in practice I would say No, because eventually it will conflict with that goal.
Lets say you have a powerful position in a corrupted country and you can steal as much as you want without anyone dare to hurt you.

At first you will be greatly increasing your chance of survival while decreasing chance of survival for the rest of population (which is ok). but as your community become weaker and weaker another community/country will be tempted to invade it. That would endanger the whole community including yourself
[ of course the above example can happen over decades by you and your offspring, the result will eventually be the same ]

What if I am a super human would it still be bad to do bad things?
If you are a super human - that is you belong to a species superior to humans - and hurting humans would increase your chance of survival then its is considered a good thing to hurt them.
We do all sort of terrible things to other species that we consider lower than ours like
Monkies => Medical experiements
Dolphins => Enslave to have some entertainment
Whales => Kill them because they reduce our fishing stock
All of that is  generally accepted and considered an honest job.
So if you are much smarter, much stronger than normal humans and you decided to use some of them as pets or slaves or run some medical experiments on them that would be totally acceptable by your "super humans" community

Why do I have to commit to that survive and thrive goal rather than having a different goal of my own?
You don't have to and in fact a small percentage of people don't commit to that goal. for example people looking for risky adventures, people who don't want kids, monks to name few examples.
The reason those people will remain a small ineffective minority is because they generally don't get to transfer their genes to next generation.

If you are one of those who don't commit to the universal goal then right or wrong depends on your religion or your own personal goals if you have no religion.

If you neither have religion nor a personal goal then right or wrong become irrelevant to you

Wednesday, September 25, 2013

Running MK802 as linux server

The goal:

Installing linux distro on MK802 and it has to
  • Be very light weight
  • Support most USB devices that I might need (Webcam, bluetooth dongle, ...) plus internal wireless lan and video card
  • Support iptables
  • Be easy to install and maintain
  • Has right package repository

First I found this page that offer wide selection of linux distros
http://liliputing.com/2012/07/linux-distributions-that-can-run-on-an-mk802-mini-pc.html

Puppy Linux 

Is very lightweight and can work from memory
That means it won't need to constantly writing on the SD Card which will extend its life.
Also means it will be very fast.
However when I clicked on the link I found that its development has been discontinued.

Miniand Lubuntu 12.04

was my choice  because Ubuntu has very good support for different devices and with Lubuntu I get a light version too.

Turns out Lubuntu didn't support my webcam, I had to download & compile the corresponding kernel modules manually for it to work

After that I found it doesn't support iptables because of missing kernel modules
This time compiling the corresponding modules wasn't enough.
I had to compile the kernel itself. and no matter what I do any kernel I compile fails to boot.

Debian Server


Was my next distro, I downloaded it from this link
http://romanrm.ru/en/a10
and it was really amazing.
extremely lightweight, not so many services, no X11 not even vim!
iptables and my webcam were working like a charm.

only one problem though, I couldn't see anything!
The server doesn't support any graphics card so even installing X11 didn't help. xorg won't start.

I contacted the developer "Roman Mamedov" and explained the problem to him and his answer was:

This is because the image uses a kernel which disables all graphic components
to save RAM (about 100 MB). If you want Mali, you need to replace the kernel
with a Desktop or Video variant from http://romanrm.ru/en/a10/kernel 
 
I followed that link, there you will find two other kernels along with their installation instructions.
I installed the Desktop kernel and now everything is working perfectly fine.

Thank you  Roman Mamedov for this great distro

Emulator  for MK802


The next thing I needed is an emulator to run the debian image on, install all development stuff plus kernel source to compile any extra drivers I might be missing.

For that I found qemu very handy
I followed the guide here
http://romanrm.ru/en/a10/qemu

Basically you need to download kernel files
initrd.img-3.2.0-4-vexpress


linux-image-3.2.0-4-vexpress_3.2.35-2_armhf.deb


vmlinuz-3.2.0-4-vexpress


from http://romanrm.ru/dl/a10/kernels/qemu/

Then run quemu
qemu-system-arm \
  -M vexpress-a9 \
  -kernel vmlinuz-3.2.0-4-vexpress -initrd initrd.img-3.2.0-4-vexpress \
  -append root=/dev/mmcblk0p2 \
  -drive if=sd,cache=unsafe,file=image.im

Saturday, August 31, 2013

Calling Paypal API

I have had this terrible experience with paypal trying doing something simple like doing an API call.

In my opinion Paypal has the worst nightmare for any developer unlike for example stripe which is a peace of cake compared to it.

Anyway after search many websites excluding developers.paypal.com I found this great page
http://coding.smashingmagazine.com/2011/09/05/getting-started-with-the-paypal-api/

In a nutshell the page present a very simple code for calling any paypal api method.

class Paypal {
   /**
    * Last error message(s)
    * @var array
    */
   protected $_errors = array();

   /**
    * API Credentials
    * Use the correct credentials for the environment in use (Live / Sandbox)
    * @var array
    */
   protected $_credentials = array(
      'USER' => 'seller_1297608781_biz_api1.lionite.com',
      'PWD' => '1297608792',
      'SIGNATURE' => 'A3g66.FS3NAf4mkHn3BDQdpo6JD.ACcPc4wMrInvUEqO3Uapovity47p',
   );

   /**
    * API endpoint
    * Live - https://api-3t.paypal.com/nvp
    * Sandbox - https://api-3t.sandbox.paypal.com/nvp
    * @var string
    */
   protected $_endPoint = 'https://api-3t.sandbox.paypal.com/nvp';

   /**
    * API Version
    * @var string
    */
   protected $_version = '74.0';

   /**
    * Make API request
    *
    * @param string $method string API method to request
    * @param array $params Additional request parameters
    * @return array / boolean Response array / boolean false on failure
    */
   public function request($method,$params = array()) {
      $this -> _errors = array();
      if( empty($method) ) { //Check if API method is not empty
         $this -> _errors = array('API method is missing');
         return false;
      }

      //Our request parameters
      $requestParams = array(
         'METHOD' => $method,
         'VERSION' => $this -> _version
      ) + $this -> _credentials;

      //Building our NVP string
      $request = http_build_query($requestParams + $params);

      //cURL settings
      $curlOptions = array (
         CURLOPT_URL => $this -> _endPoint,
         CURLOPT_VERBOSE => 1,
         //I (ramast) commented the following 3 lines for the sake of simplicity
         //CURLOPT_SSL_VERIFYPEER => true, 
         //CURLOPT_SSL_VERIFYHOST => 2,
         //CURLOPT_CAINFO => dirname(__FILE__) . '/cacert.pem', //CA cert file
         CURLOPT_RETURNTRANSFER => 1,
         CURLOPT_POST => 1,
         CURLOPT_POSTFIELDS => $request
      );

      $ch = curl_init();
      curl_setopt_array($ch,$curlOptions);

      //Sending our request - $response will hold the API response
      $response = curl_exec($ch);

      //Checking for cURL errors
      if (curl_errno($ch)) {
         $this -> _errors = curl_error($ch);
         curl_close($ch);
         return false;
         //Handle errors
      } else  {
         curl_close($ch);
         $responseArray = array();
         parse_str($response,$responseArray); // Break the NVP string to an array
         return $responseArray;
      }
   }
}

After that you can go to https://developer.paypal.com/webapps/developer/docs/classic/api/ find the call you want (make sure you click on NVP not SOAP) Then you can make a call like this
$paypal = new PayPal();
$response = $paypal->request("DoCapture", Array(
        "AUTHORIZATIONID" => "61P02217YA6177331",
        "AMT" => "10.92",
        "COMPLETETYPE" => "Complete",
        "NOTE" => "Thank you for buying from us"));
echo json_encode($response);

Friday, August 9, 2013

avrdude: stk500_recv(): programmer is not responding

I was happily playing with me new arduino uno3 board until they error started to appear and I was unable to upload any more programs to the board

I spent long time searching for a solution or at least understanding what is the problem and in this blog post I will post summary of what I have learned so far

avrdude: stk500_recv(): programmer is not responding error basically means the computer is unable to communicate with the board.

If this is your first try to upload something then there is a possibility you have software issues or problem with drivers.
I am not going to cover this case instead I will assume your board was working fine and suddenly stopped

Why?

  • Bad usb cable
  • Something is connected to pins 0,1 (serial pins)
  • Micro controller chip is fried (atmega328)
  • The chip responsible for communication between the board and PC is fried (ATmega16U2)
  • Something else (use your imagination)

How to determine the cause?


Connect pin 0 with pin 1 on your board
Start the serial monitor window
Type anything and hit enter, did what you type appear in the output box?
If Yes, then the ATmega16U2 is working and its either the cable or the atmega328

Push the reset button, do u see the L led flashing ? If yes then the atmega328 is also fine.

Cable is cheap so u can always try another cable to verify if the cable is fine or not.

How to Fix?

You can replace the atmega328 with a new one (make sure it comes with Uno bootloader)
Like this one
You can also replace your usb cable
I am not sure if its possible to replace the ATmega16U2 IC though

Monday, August 5, 2013

Online electronic shops in Egypt (Review)

This review is about shops selling electronic components like resistors, capacitors up to arduino boards



I

hate shopping in Cairo because of the transportation hell and because of the fact that I don't live in Cairo anymore.
So when electronic fever hit me I started to look for online stores that offer shipping.
And here is my feedback about the ones I found



Future electronics

http://store.fut-electronics.com/index.php

Great online store for beginners.
It explain in details each component and its uses and some possible use cases along with the datasheet and even sometimes some tutorials

The online shop is big with really great varieties  also I like the option of payment upon delivery (so I only pay when the items reach my door)

Its also relatively cheap most components are cheap but also shipping to any place in Cairo (20le) or any place in Egypt (around 45le)

They are official reseller of Sparkfun.com

First Personal experience
I made my first order with them when I was in Cairo in short vacation.
To make the story really short they didn't deliver anything
When I called to ask for the reason of the delay he told me some of the components I ordered is currently not available (damn me!).
Why didn't you call me then? no answer.
being one day before going back home, I had to go myself to their shop and get my stuff.

Important thing to say: He charged me more for at least one component than the price indicated on the website so I would say these online prices are not very reliable.

Second Personal experience
Tried to order from them again (why again? because its cheap) but this time I wanted the items to be shipped to where I live (South Sinai)
I called asking about shipping cost to south sinai he told me it will be estimated and someone will call me to confirm it.
No body called (As expected) and no one answer my calls, emails.
I was making a 500le order so I was expecting some attention but got nothing.
I asked the order be canceled (got no response either).


RAM Electronics

https://ram-e-shop.com

The online shop is also big (bigger than Future Electronics) the option of payment upon delivery is also available

The website is not as beginners friendly as the former one.
Here they are expecting that you know what you are doing also the larger selection makes it harder for a beginner like me to decide which to buy.

You may find some datasheets but in general the website is not very beginner friendly

Prices are expensive either same item in Future Electronics can cost here any thing between 100-200% and sometimes more

Shipping is also more expensive (57le for a less than 1kg shipment to South Sinai compared to 45 in Fut-E)

This shop is also an official distributor for Sparkfun.com

First Personal experience
I knew from the first look this shop is more expensive than FutE and so I have only ordered few things from there that I didn't find in the other store.

After making online order someone called to confirm then I got an SMS few hours later confirming shipment of my items by Fedex, I received my items the next day morning.
(so it was less than 24 hour between submitting the order and receiving it)
Their prices were expensive but accurate, I payed what I expected to pay

Although that experience was good but it doesn't count because I ordered only very few things

Second Personal experience
When FutE turned me down the second time I ordered everything from RAM Electronics .. I found every thing I needed and even many things that I didn't find in FutE all for higher price of course.
Just like first time I got confirmation call from them, then another call informing me one of the items I requested is not available giving me the option to ship without this item or wait until tomorrow and ship everything

the company they use for shipping is egyptexpress/fedex which has a terrible (or rather no) customer support they never picked up the phone when I called.

Despite that the package arrived within two days as promised.
I will definitely order from them again

ElGammal Electronics


http://elgammalelectronics.com/

This shop is direct competitor fo E-Ram, it has lot of components and can be cheaper sometimes than E-Ram. Only down side is that their delivery is very expensive compared to e-ram.


Deal Extreme

Deal Extreme (or dx for short) is general electronic shop not specialized like the previous two but still you could find some electronics in dx and not in the other sites.

Dx is a Chinese so you will only find there things made in China.
Its prices are generally more expensive than those two websites mentioned above but it offer FREE shipping

First Personal experienceI ordered a few items from there to test if its gonna work or will face problem with customs and delivery.
Order was placed 24th of July
Shipped 25th of July (just one day after making the order)
Received 29th of August.

Customs charge was 50% (6$ for my 12$ order)

Monday, June 3, 2013

Xen support for sysrescuecd

In this article I will explain how you can customize sysrescuecd in a way that make it run on xen.

Here goes the steps

1. Download, extract, patch the kernel

Best way to do that is to follow this guide

2. Make menuconfig

From "Processor type and features" go to "Paravirtualized guest support " then select xen

Note:If you can't see xen and you are compiling x86 kernel then you need to disable support for High Memory Support (from Processor type and features)

From "General Setup" set "Kernel compression mode" to gzip instead of XZ (Xen doesn't recognize XZ compression)

Carry on and compile/install the kernel as explained in the guide above

2. Recompile initramfs

Now you need to include the new xen modules to your initramfs file
the guide explain how to do that, follow it but please consider those two notes

In the line that says
cp -a /lib/modules/your-kernel-modules /usr/src/initramfs/lib/modules/
This is how it should look like
mkdir /usr/src/initramfs/lib/modules/
cp -a /lib/modules/<kernel version>/ /usr/src/initramfs/lib/modules/

Also in the line that says
find . | cpio -H newc -o | xz --check=crc32 --x86 --lzma2 > /usr/src/initram.igz
Change it to be
find . | cpio -H newc -o | gzip > /usr/src/initram.igz
Because again xen doesn't recognize xz compression

3. Remaster the cd with the new kernel / initramfs.igz file


Hope that helps

Friday, December 28, 2012

5 Reasons to submit your real estate in DahabRE.com


0. Its FREE!!

We don't take any kind of fees or commissions whatsoever

1. Make it easy for people to find it

DahabRE give its visitors the chance to filter their search based on many criteria like Location, Price, features (like AC, Pet friendly, ...) and more.

That save them lot of time looking for the "right" place, and also save u the time for answering the same questions again and again

2.Make your real estate appear in Google


We spend a lot of time trying to get Google know about all the new pages we get.
a simple Google search may show your real estate like this one.


3. Make posting your real estate on Facebook easier


If you like to post your real estate in Facebook groups, then you know  the deal
You create an album, upload your real estate pictures in it, post description then copy and paste this description and link to photos on facebook groups
Wouldn't it be easier to post a single link and get the rest done for you?


In the picture above I only had to post the link

 4. Make sure your clients can reach you

Lets face it Facebook messaging system is not so reliable, how many times a client sent you a message and you saw it months after?
In DahabRE you are able to provide more reliable contact methods like email or even mobile number!

5. Keep track of your reservations in a central place

If you are responsible for many real estates sometimes u can't keep track of which real estate is rented until when.
In DahabRE you can store this information and it remain hidden from visitors
although any visitor viewing your real estate page while its rented will be informed that its not available at the moment

For any questions/suggestions visit our facebook page http://facebook.com/dahabre

Thursday, August 2, 2012

Scabies ... Survival guide!

Scabies ... Survival guide!

Warning: the information presented here was made available at the hope it will be useful but without any warranty of any kind it is always recommended to consult a doctor if u can.
author is not responsible for any health damage or death caused directly or indirectly by following the tips presented in this article


What are scabies?

  • scabies are some kind of mites that live underneath skin, causing rash
  • scabies are very tiny insects that usually can not be seen by naked eye
  • scabies do not go away without medication, but its treatment is very easy
  • scabies are highly contagious and that's what is really bad about it

How do I know I am infected?

  • The most common symptom of scabies is an intense itch (especially at night) and a rash that affects a great deal of the body.
  • Its very common to see rashes on wrist (like in top picture)
  • Even though it might look like insect bites at the beginning, u can tell its scabies when it doesn't fad away within few days

I have Scabies, what do I do now?

To recover from scabies infection you need to both treat your body (or more precisely your skin) and also everything you came in touch with
I will describe how in the next questions

How do I treat my skin?

  • Most effective treatment is permethrin 5%, here in Egypt it is sold under the name "Ectomethrin 5 ointment".
  • Best time for treatment is before sleeping
  • Cover your whole body (starting from your neck and down to your feet toes)
  • If you can make your AC a little bit colder that would be better since permethrin perform better in colder temperature (but if you can't still it will be ok)
  • Even though most articles say scabies don't infect the area above your neck (head and scalp) I say be safe and put some in your head too
  • Treatment is usually done only once, u should start getting better from next day after treatment
  • sun light can neutralize the effect of  permethrin, stay away from the sun light during treatment (or have the treatment before sleeping time)
  • if you are in a place that doesn't offer any kind of medication, a very hot water on the skin can kill the mites (and hurt you) that may help a little but its neither practical nor very efficient

I came in contact with (touched) some people, but they are OK

If someone has been infected for the first time, he may not has any symptoms for 2-6 weeks so really if u had direct contact with someone he also must do same treatment described above even if he looks fine

 How do I make sure my home is scabies free?

  • Good news is, Scabies mites can't survive without a human host for 24 to 36 hours (source wikipedia ) so simply leaving a room closed for two days makes it scabies free
  • Clean your cloths/bedding with hot water
  • The sun is deadly for mites (esp. the sun of Egypt in the summer) leave anything infected in the direct sun light for couple of hours and all mites will die

I took the medication but still having rash and itching

The itching from scabies is actually an allergic reaction to the mites and their excrement, so itching may continue even after the mites are destroyed. If you are still suffering symptoms 2-3 weeks after treatment, you may need to be treated a second time.

Then, how do I know I have recovered?

In my case my skin returned back to its normal state after 3 days but as u saw in previous question this might not always be the case
So I can't give u definite answer to this question, but based on the information I gathered I would say if rash still increases at night then probably u r still infected (or re-infected)

I have just touched someone who has scabies

Always be safe and do the treatment described above, mites can walk on the skin and move from one part to another quickly
Soap, Ditol, water are all ineffective

Further reading

http://www.scribd.com/doc/59906567/How-to-Get-Rid-of-Scabies

Sunday, June 10, 2012

Recovering lost partition table

I have recently erased first few megabytes of my harddisk, any experienced user know that means my harddisk is totally inaccessible
I managed to fix this issue and I thought I should share how I fixed it with everyone

Before you read you need to know what is a sector and what is a block usually sectors are 512byte and blocks are 1024byte so a block = 2 sectors
check the output of fdisk -l /dev/sda to know the size of your sector for sure
I will assume the harddisk we need to recover is  /dev/sda

How to recover erased partition table?

1. If your system (linux system) still running

  • the file /proc/partitions contains valuable information about your partition table, you need to copy this file somewhere safe (memory stick, external HD, ...)
  • /proc/partitions contains number of blocks (size) of each partition and its name but sadly it doesn't say where is starts or ends
  • after that you will need to reboot and then continue reading next steps

2. Try testdisk

testdisk is a great tool that search for your partitions and recover it
http://www.cgsecurity.org/wiki/TestDisk
if it couldn't find all your partitions, you will still be able to make it perform "deeper search" 
If it found  all your partitions, then you are done and there are no need to finish reading this page
If it found some of your partitions, (and some other partitions previously existed) then write down the start/end of each correct partition but don't recover them (at least I didn't take that risk) and continue reading

3. Know what you are facing

OK here is the situation: to recover your partition table you need to know 2 things about each partition (where it starts and where it ends)

if you have the content of /proc/partitions then you know size of each partition in blocks, that makes it easier for you know where it ends if you knew where it starts

but how do I determine where the first partition starts?
that's easy, in the past first partition used to start at sector 63 while recent partitioning utilities would start at 2048 so its either 63 or 2048

4. Recovering first partition

Execute the following commands
parted /dev/sda <= parted is a very good tool for partitioning
unit s <= that will make parted use "sectors" instead of Gigabytes
If you only know the size of your first partition [ in blocks ]
size in sectors = size in blocks * 2
partition start is either 63 or 2048 (try both and see which one will work)
partition end = partition start + partition size in sectors

If you know the start/end of your first partition  
mkpart primary START END <= START/END are in sectors
now exit parted (type quit) and try to mount your first partition

If your first partition won't mount then either you did something wrong or a  portion of this partition was also erased along with the  partition table.
if you are sure its the second case then leave it and continue recovering the other partitions

5. Recovering other primary partitions

Now  that you have recovered the first one and you know where it ends, the next partition starts at the next sector and if you have its size you can recover it in the exact same way

6. Recovering logical partitions

In my case (which is the most common) last primary partition (sda4) is made to fill the remaining disk space and is marked as extended
and inside this partition you make your logical partitions

logical partitions are a little bit tricky because they don't start directly after each others and I couldn't tell where my first logical partition (sda5) starts

to figure those out I used parted and its nice command "rescue"
follow the following steps to recover those partitions
parted /dev/sda
unit s <= that will make parted use "sectors" instead of Gigabytes
print
in the output of print find line like this
 4      102028815s  976771054s  874742240s  extended

where 4 is your extended partition (sda4) and next two numbers are its start/end in sectors
then type the following command
  •  rescue 102028815  976771054 <= where the two numbers represent the two numbers are the numbers I got from the print statement above
parted should tell you it found some partitions and ask you if you wish to add them, say Yes


The END